DESICCANT MASTERBATCH
Model: (IM-DDA1)
| Properties Value Test method | ||
| Form: | Granulate | Internal |
| Oxide Calcium content: | 80% | Internal |
| Melt Flow Index: | 5 g/10min (190°C/2,16kg) | ASTMD-1238 |
| Density: | 2 g/cm3 | ASTMD-792 |
| Compatibility: | PE, PP, Ethylene copolymers | – |
| Base resin | LDPE | Internal |
| Appearance: | Light grey | Internal |
RECOMMENDED DOSAGE:
Average dosage 1-3%.
STORAGE & HANDLING:
Product is highly hydroscopic. Use over within 16-24 hours after opening the packing. Keep original packaging close.
Predrying of Desiccant masterbatch may be required. Avoid overheating. Packaging: 5 Kg bags.
This product is used in conjunction with recycled PE/PP materials during extrusion & injection moulding. Plastic desiccant masterbatch is a new type of functional masterbatch developed to eliminate the moisture of recycled PE and recycled PP. It helps remove moisture and cuts out oxidizing effect that occurs during recycling of the polymer.
Đánh giá
Chưa có đánh giá nào.
Sản phẩm tương tự
Model: (Vistamaxx 6202)
Physical Property
| Items | Method of experiment | Unit | Standard |
| Base carrier (100% virgin) | – | – | PE |
| Silica | – | wt% | 10 |
| MI (190oC/2.16kgs) | ASTM D1238 | g/10 mins | 8 |
| Melt Temperature | DSC | oC | 100-120 |
| Bulk density | ASTM D1895 | g/cm3 | 0.930 |
| Water Content | ASTM D570 | ppm | < 1000 |
Compatibility : PP, HDPE, LDPE, LLDPE, EVA
Processing Technique : Blow moulding, cast or blow film
Application Rate : 0.5 – 2 % of the part’s weight
Packing : 20 kgs per PP bag
Storage : Keep at dry condition
Model: (IM-ATB338)
Model: (Ecoflame B971)
Model: (Alninox 3114)
Hãy là người đầu tiên nhận xét “DESICCANT MASTERBATCH”