Phụ Gia Chống Đóng Khối
Model: (EXP 5700)
Ứng dụng: Sử dụng sản xuất phụ gia Antiblock.
Đánh giá
Chưa có đánh giá nào.
Sản phẩm tương tự
Model: (Ecoflame I138)
| Properties Value Test method | ||
| Form: | Granulate | Internal |
| Oxide Calcium content: | 80% | Internal |
| Melt Flow Index: | 5 g/10min (190°C/2,16kg) | ASTMD-1238 |
| Density: | 2 g/cm3 | ASTMD-792 |
| Compatibility: | PE, PP, Ethylene copolymers | – |
| Base resin | LDPE | Internal |
| Appearance: | Light grey | Internal |
RECOMMENDED DOSAGE:
Average dosage 1-3%.
STORAGE & HANDLING:
Product is highly hydroscopic. Use over within 16-24 hours after opening the packing. Keep original packaging close.
Predrying of Desiccant masterbatch may be required. Avoid overheating. Packaging: 5 Kg bags.
Model: (IM-DDA1)
Component and Physical Property
| Items | Method of experiment | Unit | Standard |
| Base carrier | – | – | LLDPE |
| UV (HALS) | – | wt% | 20 |
| MI (190oC/2.16kgs) | ASTM D1238 | g/10 mins | 20 |
| Melt Temperature | DSC | oC | 100-120 |
| Bulk density | ASTM D1895 | g/cm3 | 0.930 |
| Water Content | ASTM D570 | ppm | < 1000 |
Properties:
- IM-UV783 gives very good UV protection to polyolefin plastics;
- The active ingredient consists of HALS which gives the most effective light stabilization effect at low dosages;
- It has no effect on sealability;
- IM-UV783 can be used in all polyolefin – mainly in thin applications, such as films and tapes;
- It is especially recommended for applications requiring low volatility and minimal migration;
- Color stability is over 24 months and upon to the color pigment quality in the part.
Compatibility : PP, HDPE, LDPE, LLDPE, EVA
Processing Technique : Cast or blow film, Calendering, Injection Moulding, Blow moulding
Application Rate : 1 – 3 % of the part’s weight
Packing : 20 kgs per PP bag
Storage : Keep at dry condition
Model: (IM-UV783)
Hãy là người đầu tiên nhận xét “Phụ Gia Chống Đóng Khối”