Phụ Gia Bôi Trơn
Model: (Wax Q112)
Ứng dụng: Sử dụng phụ gia bôi trơn trong quá trình gia công sản phẩm hạt nhựa masterbatch.
Đánh giá
Chưa có đánh giá nào.
Sản phẩm tương tự
Component and Physical Property
| Items | Method of experiment | Unit | Standard |
| Base carrier | – | – | LLDPE |
| UV (HALS) | – | wt% | 20 |
| MI (190oC/2.16kgs) | ASTM D1238 | g/10 mins | 20 |
| Melt Temperature | DSC | oC | 100-120 |
| Bulk density | ASTM D1895 | g/cm3 | 0.930 |
| Water Content | ASTM D570 | ppm | < 1000 |
Properties:
- IM-UV783 gives very good UV protection to polyolefin plastics;
- The active ingredient consists of HALS which gives the most effective light stabilization effect at low dosages;
- It has no effect on sealability;
- IM-UV783 can be used in all polyolefin – mainly in thin applications, such as films and tapes;
- It is especially recommended for applications requiring low volatility and minimal migration;
- Color stability is over 24 months and upon to the color pigment quality in the part.
Compatibility : PP, HDPE, LDPE, LLDPE, EVA
Processing Technique : Cast or blow film, Calendering, Injection Moulding, Blow moulding
Application Rate : 1 – 3 % of the part’s weight
Packing : 20 kgs per PP bag
Storage : Keep at dry condition
Model: (IM-UV783)
Component and Physical Property
| Items | Method of experiment | Unit | Standard |
| Base carrier | – | – | LLDPE |
| MI (190oC/2.16kgs) | ASTM D1238 | g/10 mins | 20 |
| Melt Temperature | DSC | oC | 100-120 |
| Bulk density | ASTM D1895 | g/cm3 | 0.97 |
| Water Content | ASTM D570 | ppm | < 1000 |
Method
| Time (h) | Addition rate | Time (h) | Addition rate (%) |
| 1-2 | 5% | 3-5 | 2% |
| 2-3 | 3% | After 5 | 0.5-2% |
Properties:
Additives : Processing aid
Processing temperature : 150 – 320 (oC)
Applicate rate : 0.5-5 %
Pellet Size : 3×3 (±0.3) mm
Carrier resin : PE
Compatibility : PE, PP
Packing : 25 kgs per PP bag
Storage : Keep at dry condition
Shetf Life: 18 month
Model: (IM-PPA15)
Model: (Alninox 3114)
Hãy là người đầu tiên nhận xét “Phụ Gia Bôi Trơn”